Tv Home Media 2 Driver

  • ATV1800E

Tvhome Media 2 Driver For Windows 8

  • ATV380
  • ATV1200 ( for 4.2OS )
  • ATV585
  • ATV586T2

Home / TV-tuners; Download drivers for TV-tuners for free. Operating System Versions: Windows XP, 7, 8, 8.1, 10 (x64, x86) Category: Devices. Subcategory: TV-tuners. Popular Drivers. Webcams other devices printers Wi-Fi devices. Are you tired of looking for the drivers for your devices? Acer Veriton S4620G AverMedia TV Tuner Driver for Windows 8. TV Tuner / Capture Card AverMedia. Windows 8 64 bit. Mar 11th 2020, 18:12 GMT.

  • ATV586I
  • ATV495Pro
  • ATV1910
  • ATV1960
  • TV Tuner for PC
  • Manual
  • Windows Driver
  • Software
  • Linux Driver
  • Raspberry Pi Driver
  • T230C
  • T232
  • A681B
  • T230A
  • HD Cap X
  • U800
  • iGrabber (VHS to DVD)
  • Capit Lite
  • iGrabber Live
  • US165
  • 1. Have downloaded the SPI and Firmware files from the official website,how to update them?

    Please don’t unzip the files, copy them to SD card or USB disk root directory, connect to your Enjoy TV Box/Dongle and run
    Upgrade app, select Local update. Find SPI to update first,then Firmware.

  • 2. No update files found in Upgrade app->local update option?

    Make sure your external devices have been mounted on your Enjoy TV Box/Dongle firstly.If yes, but still no files found, please
    press menu button on remote control for 8 times continued, it will search all files again.

  • 3. If meet below problems, please try to do factory reset.

    a. Pre-installed apps can’t be run normally;
    b. Function of the system suddenly doesn’t work,such as Wi-Fi can not be connected.
    c. The system runs slow suddenly;
    d. The issues that still can’t be fixed after restarting Enjoy TV Box/Dongle; When you meet above problems ,please try to do factory reset in Settings->Backup & reset,but note that this will de1ete all your personal data and apps.

  • 4. Enjoy TV Box/Dongle can’t start normally.

    Try to enter into recovery mode and force to restore factory settings as below steps:
    a. Use needles to press and hold the upgrade button at the back/bottom of Enjoy TV Box/Dongle.
    b. Plug in power adapter, hold the button for 5 seconds;
    c. Normally you will see recovery interface;
    d. Then, loosen the button and press up/down button on IR remote control/USB keyboard to find Wipe data/factory reset and select Yes to wipe. wipe media partition,cache partition are necessary sometimes.
    e. Choose Reboot the system now option, and the system will restart automatically.

  • 5. I have already connected Enjoy TV Box to my old TV via CVBS/Ypbpr cable,but no any image appear on TV screen,shows No Signal?

    If your Enjoy TV Box is dual core box with Android 4.1 system,please check below:
    a. About CVBS:
    Firstly, you have to connect the Enjoy TV Box to a TV which has HDMI,go to Setting->Display and select the output mode to lower resolution(480i),then,change the output to CVBS in setting->CVBS/YUV,choose CVBS and save the setting. Then, connect Enjoy TV Box to your old TV,make sure TV source is CVBS, you will get the android screen on TV.
    b. About Ypbpr:
    Make sure TV source is on component/YPbPr. Connect the Enjoy TV Box to your TV via component/Ypbpr directly(did not do anything like above a, default output mode is HDMI 720p),as long as the HDMI output mode is 720P. Ypbpr also can output image.If no any screen, have to do like above a to select YUV mode in Enjoy TV Box setting, then, try again.
    If your Enjoy TV Box is dual core box with android 4.2 or quad core box with android 4.4 system, just make sure CVBS/ Ypbpr (no HDMI cable plugged) cable is connected, then, power on the box and you will get the image on TV screen.

  • 6. Remote control doesn’t work.

    a. Try to replace the batteries;
    b. Try to restart your Enjoy TV Box/Dongle;
    c. If it is 2.4G wireless remote control,try another USB port. If Infrared remote control, make sure your remote control is pointed to the infrared receiver on box/dongle(external receiver cable on dongle)
    d. If your remote is KR100,please try to initialize:
    a) Press ESC and G key on the keyboard together, LED keeps shining, after 5 seconds, LED will be off and on again.
    b) Press Y and ” key on the keyboard together, LED keeps shining, after 5 seconds,LED will be off and enter into checking codes status.

  • 7. About standby,wakeup and power off.

    a: Press the power button on infrared remote control, the box/dongle will enter into standby mode, press power button again, will wakeup.
    b: Press the power button on 2.4G wireless remote control, the box/dongle will enter into standby mode, if you want to wake it up, have to press the power button on box, because there is no power supply for external remote control in standby mode.
    c: Press the power button for one time on hardware to get standby and wakeup.
    d: Press the power button for 3 seconds continued on hardware, it will power off(depends on hardware, some models have no this function), re-plug the power adapter, the box will start up.

  • 8. Bluetooth option can not be turned on.

    a. If your box/dongle is using dual band Wi-Fi module which supports Bluetooth, the option can be turned on.
    b. If your box/dongle is using single band Wi-Fi module, you have to connect an external USB Bluetooth dongle(only for Geniatech android 4.0/4.1 firmware)

  • 9. Can not type “&” “%” via my 2.4G remote control/keyboard.

    Try to change the default input method to Engliah(US) in Settings->Language&input->default.

  • 10. How to use Airplay function?

    Make sure your box/dongle and iphone/ipad are working within the same network, run MediaCanter app on the box/dongle, enable Airplayer and automatically Start option(if your box/dongle is Android 4.0/4.1 system,the AirPlayer is enabled by default).
    Then, run the online/local media application on iphone/ipad, select the file and find the box/dongle device, click to push.

  • 11. How to use my Android phone to control the TVbox?

    Please install the RemoteIME app on your android phone,make sure your phone and Enjoy TV Box/Dongle are working in the same network, run RemoteIME and press the search button ,you will see the IP address of Enjoy TV Box/Dongle,click IP to connect,and then,your phone will be a remote control for our box. You also can install the 3rd party such kind of app in market.

  • 12. How to use Skype video call?

    Connect one external USB camera/webcam to the Enjoy TV Box/Dongle, run Skype and enable video call in Skype setting, then, starting video call.

  • 13. How to use Miracast function(only for Geniatech Android 4.2 and 4.4 system )?

    a: Make sure your android phone supports Miracast function;
    b: Enable Wi-Fi on both box/dongle and phone, run Miracast app on box/dongle, find the Screen Mirroring/Cast Screen/Screen output option ect(different mobile phone has different name for this function),box/dongle and phone will be searched with each other, click and accept the connection,then, you will see the whole screen of the phone mirrored to the TV screen.

  • 14. How to use XBMC to watch movies?

    a.l ocal videos: connect your external devices to the box/dongle,run XBMC app,select Videos -> Files -> Add videos -> Browse -> Root filesystem -> mnt(press down button on remote control to find “mnt”) -> choose your external devices,maybe sda1/sdb1 ect and click OK to save the setting, the files folder will be added into Files options in XBMC.
    b. Online video:You can download and install add-ons in Videos->Add-ons->Get More,or search for add-ons zip files in XBMC forums,or install the zip file in System->Settings->Add-ons->Install from zip file(from external storage).

  • 15. Why no enough flash memory in setting->storage.

    We divided the flash memory into several partitions, one for system, one for cache, one for data and so on(different system has different partitions), so, the storage size in setting->storage is only one part of the whole flash.

If above is helpless for your problem, please send email to support team.

Are you getting error messages 'Setup could not detect your product', TV Tuner not available' or 'Unable to locate capture filter' after Windows 10 installed an update?

This is a known 'feature' of the new release of Windows 10, related to video cameras but also affecting TV tuners and video recorders.

The latest versions of WinTV v10, v8.5, WinTV v8 and Hauppauge Capture automatically update the Windows 10 drivers to fix this error message. If you need to manually fix this, click here.

Questions or problems? Please contact Hauppauge support at: [email protected]

  • Prodinfo: get information on your Hauppauge TV tuner

    Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

  • HCWClear: remove the Hauppauge driver and applications from your PC

    HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.

  • Digital Signal Monitor: displays the relative strength of the digital signal on the channel you are tuned to

    The Signal Monitor is a handy tool which can be used to either adjust your digital TV antenna, or when used with digital cable TV, to know if your digital signal is too weak to receive a signal without distortion.

  • Rescan for TV channels: How to re-scan for channels in the WinTV application

    If your TV channel line up has changed due to a change in transmission frequencies, we recommend that you erase the WinTV channel database before you re-scan for channels.

  • IR Blaster setup

    The IR Blaster is suppored on some model HD PVR 2's and the Colossus 2. Learn how to setup the IR Blaster to control your cable or satellite set top box in WinTV v10.

Windows 10 requires special drivers to avoid errors during the Hauppauge product installation.

The latest versions of WinTV v10, 8.5 and WinTV v8 and Hauppauge Capture include these drivers. But if you are looking just for the Windows 10 driver, these are updated drivers which can be used with Windows 10.

North America products

  • WinTV-dualHD
  • WinTV-quadHD USB
  • ImpactVCB-e
  • HD PVR 2 (all models)
  • Colossus2

European products

  • WinTV-dualHD, WinTV-soloHD

How to find the product code of your Hauppauge product:

Hauppauge product codes on WinTV internal boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). You need to look at the first two numbers to determine the product type. The other numbers are related to the accessories which are on the product.

On the MediaMVP, WinTV-USB and other 'boxes', the product code is normally on a label on the bottom of the case.

165xxx WinTV-quadHD PCIe
204xxx WinTV-dualHD
111401, 72001 WinTV-HVR-955Q, WinTV-HVR-950Q
72301, 65301 111XXX WinTV-HVR-850
65XXX WinTV-HVR-950
1111XX WinTV-HVR-850, WinTV-Analog Stick
122XXX USB-Live2
131201 Colossus
67XXX WinTV-HVR-1150
22XXX, 79XXX, 118xxx WinTV-HVR-1250, -1260, -1265
723x WinTV-HVR-1260 (HP)
88XXX WinTV-HVR-2250
75XXX WinTV-HVR-1950
74XXX WinTV-HVR-1600
78XXX WinTV-HVR-1800
85XXX WinTV-HVR-1850
77XXX WinTV-HVR-1500
150xxx WinTV-HVR-55xx
69xxx, 121xxx WinTV-HVR-4xxx
23XXX WinTV-PVR-500
26XXX, 25XXX WinTV-PVR-150
28XXX WinTV-PVR-160
48XXX WinTV-PVR-250/350
32XXX WinTV-PVR-250
30XXX WinTV-PVR-250

878 or 848 based WinTV boards:

34XXX 88X based WinTV boards

86XXX MediaMVP

110XXX MediaMVP-HD


Hauppauge has a new SDK available for .NET applications. The SDK simplifies the development of TV applications in .NET. The SDK makes it easy for applications to perform functions like querying the available channels, start watching a channel in an application supplied window, pause/play, adjust volume, display OSD graphics, record live tv to a file, etc.

Download Media Drivers

The SDK is provided under NDA and can be requested at [email protected] or [email protected]